Commercial Cleaning Services2019-08-20T07:19:08+00:00

Commercial Cleaning Services

Chimney Commercial Duct Cleaning

Though the black residue in the chimney from burning wood is called creosote, it is in fact mostly tar. There are three types of creosote that are found in chimneys and they are usually called ‘stages’ or ‘degrees.’ All three forms are combustible and should be removed. The most severe stage may require a Chemical Catalyst.

ProTech Chimney Restoration offers safe and professional cleanings to all of our customers. Not only is the care of your chimney important to us, but the care of your home is as well. To ensure that we are protecting your home from any damage, drop cloths will be used to protect all surface areas near the fireplace. Our technicians will then clean the entire system from the fireplace up, using professional brushes and equipment, along with the chimney, Our cleaning services also include a level 1 NFPA Inspection.

All of our chimney technicians are nationally certified by the Chimney Safety Institute of America (CSIA). They regularly attend continuing education classes and seminars to stay up-to-date with the latest innovations and technology related to our industry.

Commercial Dryer Vent Cleaning

The dryer’s key function is to eliminate moisture recovered during the heating of damp clothing.  This humidity is expelled outdoors through the dryer vent ductwork and cap. Lint and debris will buildup over time and cause blockage within the components preventing proper ventilation and a fire hazard.

Commercial dryer vent cleaning is essential in prevent clothing dryer fires and dryer vent fires are responsible for significant damage, injuries and loss of life each year according to the Consumer Product Safety Commission.

The majority of commercial dryer vent fires occur as a result of highly flammable lint getting caught in the clothing dryer ductwork and becoming heated to the point of ignition. Lint traps and filters catch a large percentage of the lint and debris but the remaining lint and debris sticks in the ductwork and piping, building up over time and creating the ideal conditions for a dryer vent fire.

Gas clothing dryers produce carbon monoxide which can be forced back into the facility if the dryer vent exhaust is inadequately vented or blocked, creating a dangerous conditions.

Reduce fire hazards, save money, reduce operation costs and save energy by keeping your dryer ductwork clean.

“Air duct cleaning” implies only the air ducts will be cleaned, when in fact it refers to the cleaning of the entire heating, ventilating, and air conditioning (HVAC) system. Commercial air ducts, air handlers, supply, return and exhaust cleaning is essential for maintaining optimum system performance, reducing energy use and providing the best possible indoor air quality for a healthier environment. All components of the air duct and HVAC system must be cleaned in order to obtain the most effective results and prevent recontamination of the system.

Bacteria, dust, mold, pollen and other hazardous materials accumulate in a building’s HVAC and air duct system throughout everyday use. Costly issues can occur if dirty air duct systems and HVAC units are ignored. The continuous re-circulation of these contaminants cause buildup resulting in component failures and poor indoor air quality for the occupants.

We are frequently asked how we eliminate the spread of contaminants while the air duct and HVAC system is cleaned.  The air duct and HVAC system is placed under continuous negative pressure via vacuum and inflatable air duct zoning bag systems to prevent the spread of contaminants during the cleaning process. This negative pressure serves to extract, collect and remove the contaminants. The continuous negative pressure allows very fine particles to be removed as they become airborne.

Before cleaning commercial HVAC systems we always discuss expectations and determine results, examine blue prints if readily available or an on-site evaluation can be conducted, and discuss the dates and times the work can be performed as well as any site preparation needed to safeguard the indoor space. We will also discuss cleaning products and review material safety sheets and communicate the project to the facility team and occupants. We are also always happy to answer any and all questions regarding cleaning equipment and the cleaning process techniques and to address all safety and environmental concerns.

HVAC Cleanliness Assessment Schedule

Building Use Air Handling Unit Supply Air Ducts Return and Exhaust Air Ducts
Industrial 1 Year 1 Year 1 Year
Residential 1 Year 2 Years 2 Years
Light Commercial 1 Year 2 Years 2 Years
Commercial 1 Year 2 Years 2 Years
Healthcare 1 Year 1 Year 1 Year
Marine 1 Year 2 Years 2 Years

HVAC condenser and evaporator coil cleaning is a quick and cost-effective maintenance task to increase your buildings energy efficiency. Dirty condenser and evaporator coils can significantly increase HVAC energy usage and associated utility costs while decreasing component life according to the U.S. Department of Energy and Environmental Protection Agency.

The U.S. Department of Energy states, “dirty condenser coil can increase compressor energy consumption by 30 percent” because it requires compressors to run longer, increasing energy usage and decreasing component longevity.

Decreased airflow occurs when an evaporator coil is full of contaminants such as dirt, dust, mold spores, moisture and pollen, causing reduced heat transfer and dehumidification processing. This can cause poor air quality and excessive work on the motors leading to system failures.

Foreign materials on the condenser and evaporator become unintentional insulators blocking the free flow of air through the coils and decreasing the rate of heat transfer between the coil and air.

High-efficiency HVAC systems benefit from regular coil inspection and cleaning. The high-efficiency systems operate at higher pressures, and are less tolerant to increased static pressure. They also require more capable heat transfer across larger coils in order to run at optimal capacity. Units with a high Seasonal Energy Efficiency Rating generally have variable speed fan motors that adjust on demand but when they need to run faster due to poor coil air flow, the effectiveness of the system is compromised.

Cleaning the HVAC condenser and evaporator coils saves money, maintains peak operating efficiency, improves indoor air quality and improves the reliability and service life of the heating and cooling system.

Cooling towers move air through the water system with a fan, allowing water vapor to sit within the system. Mineral scale buildup in cooling towers, chillers and system piping is a common challenge for many industrial water systems. A clean cooling tower supplies cooled water to enable the chiller, coils and other HVAC system components to efficiently cool air.

According to the Occupational Safety and Health Administration, the water vapor can stay within the ideal temperature range for Legionnaires’ disease bacteria to grow. This happens when the cooling tower water becomes dirty with slime, algae and sludge building up on the basin floor.  Additionally, dirty water can affect chiller operating efficiency and increase energy costs. You should have the tower cleaned and disinfected whenever scale, slime or sediment is present.

Our tower vacuums remove slime, mud, algae, bacteria and other contaminants from the sides and floor of the cooling tower basin. A foaming detergent is used on the tower to dissolve tough deposits. For added protection adding our biocide product, Tower Treat “S” cooling tower treatment, after cleaning the basin prevents bacterial growth.

The other components of cooling tower systems are called chillers. Chillers generally use the most energy and regular cleaning and maintenance ensures they operate reliably and efficiently. Chiller performance is related to its heat transfer efficiency and there are miles of tubing in a chiller’s heat exchangers. Keeping the tubes clean means better chiller efficiency.

Tubes can become covered with slime, algae and scale. When tubes become packed solid with deposits, tubes need to be flushed with water and a tube cleaner. We use a rotary tube cleaning machines to clean tough scale, biological and other buildup in chiller tubes.

Commercial Chimney Flash Inspections

When should your chimney be inspected?

  • Any time you notice visible soot anywhere in your home
  • Before each heating season
  • Before installation of a new fuel burning appliance (furnace, hot water heater, etc.)
  • Before purchasing a new home
  • Immediately after a chimney or house fire
  • If your home has been struck by lightening
  • If your chimney has experienced impact (hit by a falling tree, etc.)
  • If you notice staining on the inside or outside of your home in the vicinity of the chimney
  • If the roof has been replaced

How often should you get your chimney cleaned?

  • Every 36 fires or once a year, whichever comes first
  • When you purchase a pre-built home or dwelling

All of ProTech Chimney Restoration Inspections meet level 2 NFPA requirements and are performed by our nationally certified technicians.

LEVEL I OR VISUAL CHIMNEY INSPECTION

A Level I chimney inspection covers all readily accessible portions of the exterior and interior and the accessible portions of appliance and chimney connections. A Level I inspection does not include a video scan, but you can choose to add this option for a more thorough evaluation of the fireplace or furnace flue system.

LEVEL II

If you are selling your house or buying a new one, the NFPA recommends a Level II inspection. Inspection requirements for purchasing a new home are different for each transaction, but it is highly recommended that the chimney be thoroughly inspected to avoid costly repairs later. Most home inspectors do not have the expertise to evaluate the condition of the chimney. A Level II inspection covers all accessible portions of the chimney interior and exterior including areas within accessible attics, crawl spaces, and basements and includes inspection by video scanning.

Level III

A Level III inspection is usually called for if there is damage to your home because of a chimney fire or severe storm, this includes lightning damage, wind damage and earthquakes. If we can’t determine the safety of the system by doing a Level I or Level II inspection then a Level III will be recommended.

Emergency Services

For any emergencies please call us at 952-715-2471.

  • This field is for validation purposes and should be left unchanged.

Contact Us for a Commercial Cleaning Quote

Please use the form to send us feedback, get information, or to request service. We look forward to hearing from you!

If you require immediate assistance please call us at 952-715-2471.

Add On Services and Air Duct Cleaning Packages

Add On Services

To serve you better we offer a full list of reasonably priced of a la carte services. Whether you need furnace cleaning, have an AC unit that needs a tune up or are looking to have your chimney cleaned and inspected, you can pick the services you need, and skip the ones you don’t! Don’t see something on the list? Call us today at 952-715-2471 for pricing and information.

Furnace Cleaning
$99.95

Improves efficiency and heat transfer. Consists of:
Thorough system cleaning
Safety inspection

Chimney & Fireplace Cleaning with Level 1 Inspection
$99.95

Cleaning of smoke shelf, smoke chamber, damper plate and firebox
Safety inspection

Dryer Vent Cleaning
$99.95

Protects against fire, smoke and pollutants
Reduces energy consumption
Clothing dries quicker and extends life of dryer

AC Tuneup
$99.95

Clean outside condenser
Check a-coil for proper air flow
Check capacitors and electrical
Full safety inspection

Air Duct Sanitizing
$89.95

Eliminates organic growth
Fragrance free – biodegradable – hypoallergenic
USDA approved for use in food processing areas

Water Heater Cleaning
$89.95

Clean baffles
Clean exchangers
Clean jets and flue

Refrigerator & Freezer Cleaning
$79.95

Condenser and evaporator coil cleaning
Resuces operating costs and energy use

Boiler Cleaning
$99.95

Hand brushed and vacuumed
Improves efficiency and heat transfer by removing build up

Air Duct and Furnace Cleaning Packages

Looking for the best prices on air duct cleaning? Whether you need the ductwork in an 800 square foot house or a 5,000 square foot office building cleaned we have the right tools for the job. Call us today at 952-715-2471 to schedule an appointment.

STANDARD

Air Duct Cleaning

High-Pressure Air Snakes & Wands
Unlimited Supply & Return Vents
All Trunk and Main Lines
Up to 2,500 square feet
Only $20 for additional 500ft2
$99

SAVE $100.95

Schedule Now
DELUXE

Air Duct Cleaning

Predator Cleaning System
Unlimited Supply & Return Vents
All Trunk and Main Lines
Up to 2,500 square feet
Only $20 for additional 500ft2
Add Furnace Cleaning for only $89
$229

SAVE $70.95

Schedule Now
ULTIMATE

Air Duct Cleaning

Predator Cleaning System
Air Duct System Sanitizing
Furnace Cleaning
Unlimited Supply & Return Vents
All Trunk and Main Lines
Up to 2,500 square feet
Only $20 for additional 500ft2
$349

SAVE $100.95

Schedule Now
ELITE

Air Duct Cleaning

Predator Cleaning System
Viper Microline into every vent
Air Duct System Sanitizing
Furnace Cleaning
Unlimited Supply & Return Vents
All Trunk and Main Lines
Up to 2,500 square feet
Only $20 for additional 500ft2
$529

SAVE $120.95

Schedule Now